200W Single Output Meanwell Power Supply

Meanwell LED Driver, Meanwell Power Supply, Meanwell Transformer gained CE,CB, UL certificates. 2 years warranty

 

Features of Meanwell Driver, Meanwell Power Supply:AC input range selectable by switch Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Withstand 300vac surge input for 5 second Built-in constant current limiting circuit 100% full load burn-in test LED indicator for power on Fixed switching frequency at 90KHz Low cost,high reliability 2 years warranty Specification of Meanwell Transformer:

Model		NES-200-3.3	NES-200-5	NES-200-7.5	NES-200-12	NES-200-15
Output	DC VOLTAGE	3.3V	5V	7.5V	12V	15V
	RATED CURRENT	40A	40A	27A	17A	14A
	CURRENT RANG	0 ~ 40A	0 ~ 40A	0 ~ 27A	0 ~ 17A	0 ~ 14A
	RATED POWER	132W	200W	202.5W	204W	210W
	RIPPLE & NOISE (max.) Note.2	150mVp-p	150mVp-p	150mVp-p	150mVp-p	150mVp-p
	VOLTAGE ADJ. RANGE	2.97 ~ 3.7V	4.5 ~ 5.6V	6 ~ 9V	10 ~ 13.5V	13.5 ~ 18V
	VOLTAGE TOLERANCE Note.3	+2.0%	±2.0%	±2.0%%	±1.0%	±1.0%
	LINE REGULATION Note.4	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	LOAD REGULATION Note.5	±1.5%	±1.0%	±1.0%	±0.5%	±0.5%
	SETUP, RISE TIME	1000ms, 50ms/230VAC; 1000ms, 50ms/115VAC at full load
	HOLD UP TIME (Typ.)	20ms/230VAC; 16ms/115VAC at full load
INPUT	VOLTAGE RANGE	90 ~ 132VAC / 180 ~ 264VAC by switch; 254 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY(Typ.)	75%	79%	82%	85%	85%
	AC CURRENT (Typ.)	4.5A/115VAC; 2.5A/230VAC
	INRUSH CURRENT (Typ.)	40A/115VAC; 55A/230VAC
	LEAKAGE CURRENT	<3.5mA / 240VAC
PROTECTION	OVERLOAD	105 ~ 150% rated output power
		Protection type : Constant current limiting, recovers automatically after fault condition is removed
	OVER VOLTAGE	3.8 ~ 4.9V	5.75 ~ 6.75V	9.4 ~ 10.9V	13.8 ~ 16.2V	18 ~ 21V
		Protection type : Shut down O/P voltage, re-power on to recover
	OVER TEMPERATURE	95°C±5°C (3.3V); 100°C±5°C (5V); 90°C±5°C (7.5V);85°C±5 °C±(12~24V);80°C± 5 °C(27~36V);75°C ±5°C (48V) (TSW1) Detect on case
		Protection type : Shut down O/P voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	-20 ~ +50°C (Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85°C , 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/°C (0 ~ 50°C )
	VIBRATION	10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note 6)	SAFETY STANDARDS	UL60950-1 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25 / 70% RH
	EMI CONDUCTION & RADIATION	Design refer to EN55022 (CISPR22) Class A
	EMC IMMUNITY	Design refer to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, light industry level, criteria A
OTHERS	MTBF	271.9K hrs min. MIL-HDBK-217F (25°C )
	DIMENSION	215*115*50mm (L*W*H)
	PACKING	0.93Kg; 12pcs/12Kg/0.92CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.