Meanwell 150W Single Output Switching Power Supply

Meanwell LED Driver, Meanwell Power Supply, Meanwell Transformer gained CE,CB, UL certificates. 2 years warranty

 

Features of Meanwell Driver, Meanwell Power Supply:AC input range selectable by switch Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection LED indicator for power on 100% full load burn-in test High efficiency, long life and high reliability 2 years warranty Specification of Meanwell Transformer:

Model		NES-150-3.3	NES-150-5	NES-150-7.5	NES-150-9	NES-150-12
Output	DC VOLTAGE	3.3V	5V	7.5V	9V	12V
	RATED CURRENT	30A	26A	20A	16.7A	12.5A
	CURRENT RANG	0 ~ 30A	0 ~ 26A	0 ~ 20A	0 ~ 16.7A	0 ~ 12.5A
	RATED POWER	99W	130W	150W	150W	150W
	RIPPLE & NOISE (max.) Note.2	80mVp-p	80mVp-p	120mVp-p	120mVp-p	120mVp-p
	VOLTAGE ADJ. RANGE	3.2 ~ 3.5V	4.75 ~ 5.5V	7.13 ~ 8.3V	8.55 ~ 9.9V	11.4 ~ 13.5V
	VOLTAGE TOLERANCE Note.3	±3.0%	±2.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION Note.4	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	LOAD REGULATION Note.5	±2.0%	±1.0%	±0.5%	±0.5%	±0.5%
	SETUP, RISE TIME	800ms, 20ms/230VAC 1200ms, 30ms/115VAC at full load
	HOLD UP TIME (Typ.)	24ms/230VAC ; 0ms/115VAC at full load
INPUT	VOLTAGE RANGE	90 ~ 132VAC / 180 ~ 264VAC by switch 254 ~ 373VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY(Typ.)	73%	78%	80%	83%	83%
	AC CURRENT (Typ.)	3A/115VAC 2A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 45A/230VAC
	LEAKAGE CURRENT	<2mA / 240VAC
PROTECTION	OVERLOAD	110 ~ 150% rated output power
		Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	3.8 ~ 4.65V	5.75 ~ 6.75V	8.6 ~ 10.1V	10.4 ~ 12.2V	13.8 ~ 16.2V
		Protection type : Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT	WORKING TEMP.	-20 ~ +60°C (Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85°C , 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/°C (0 ~ 50°C )
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note 6)	SAFETY STANDARDS	UL60950-1, TUV EN60950-1,GB4943 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 70% RH
	EMI CONDUCTION & RADIATION	Compliance to EN55022 (CISPR22) Class B,GB9254 CLASS B
	HARMONIC CURRENT	Compliance to EN61000-3-2,-3,GB17625.1
	EMC IMMUNITY	Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1, heavy industry level, criteria A
OTHERS	MTBF	433.3Khrs min. MIL-HDBK-217F (25°C )
	DIMENSION	199*98*38mm (L*W*H)
	PACKING	0.7Kg; 20pcs/15Kg/0.72CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.
	4. Line regulation is measured from low line to high line at rated load.
	5. Load regulation is measured from 0% to 100% rated load.
	6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives
	7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.